Live manual Debian Live

# Debian Live Manual

# Exemple

770

# 16. Examples

771

This chapter covers example builds for specific use cases with live systems. If you are new to building your own live system images, we recommend you first look at the three tutorials in sequence, as each one teaches new techniques that will help you use and understand the remaining examples.

772

16.1 Using the examples

773

To use these examples you need a system to build them on that meets the requirements listed in Requirements and has live-build installed as described in Installing live-build.

774

Note that, for the sake of brevity, in these examples we do not specify a local mirror to use for the build. You can speed up downloads considerably if you use a local mirror. You may specify the options when you use `lb config`, as described in Distribution mirrors used at build time, or for more convenience, set the default for your build system in `/etc/live/build.conf`. Simply create this file and in it, set the corresponding `LB_MIRROR_*` variables to your preferred mirror. All other mirrors used in the build will be defaulted from these values. For example:

775

LB_MIRROR_BOOTSTRAP="http://mirror/debian/"
LB_MIRROR_CHROOT_SECURITY="http://mirror/debian-security/"
LB_MIRROR_CHROOT_BACKPORTS="http://mirror/debian-backports/"

776

16.2 Tutorial 1: A default image

777

Use case: Create a simple first image, learning the basics of live-build.

778

In this tutorial, we will build a default ISO hybrid live system image containing only base packages (no Xorg) and some live system support packages, as a first exercise in using live-build.

779

You can't get much simpler than this:

780

$ mkdir tutorial1 ; cd tutorial1 ; lb config

781

Examine the contents of the `config/` directory if you wish. You will see stored here a skeletal configuration, ready to customize or, in this case, use immediately to build a default image.

782

Now, as superuser, build the image, saving a log as you build with `tee`.

783

# lb build 2>&1 | tee build.log

784

Assuming all goes well, after a while, the current directory will contain `live-image-i386.hybrid.iso`. This ISO hybrid image can be booted directly in a virtual machine as described in Testing an ISO image with Qemu and Testing an ISO image with VirtualBox, or else imaged onto optical media or a USB flash device as described in Burning an ISO image to a physical medium and Copying an ISO hybrid image to a USB stick, respectively.

785

16.3 Tutorial 2: A web browser utility

786

Use case: Create a web browser utility image, learning how to apply customizations.

787

In this tutorial, we will create an image suitable for use as a web browser utility, serving as an introduction to customizing live system images.

788

$ mkdir tutorial2
$ cd tutorial2
$ lb config
$ echo "task-lxde-desktop iceweasel" >> config/package-lists/my.list.chroot

789

Our choice of LXDE for this example reflects our desire to provide a minimal desktop environment, since the focus of the image is the single use we have in mind, the web browser. We could go even further and provide a default configuration for the web browser in `config/includes.chroot/etc/iceweasel/profile/`, or additional support packages for viewing various kinds of web content, but we leave this as an exercise for the reader.

790

Build the image, again as superuser, keeping a log as in Tutorial 1:

791

# lb build 2>&1 | tee build.log

792

Again, verify the image is OK and test, as in Tutorial 1.

793

16.4 Tutorial 3: A personalized image

794

Use case: Create a project to build a personalized image, containing your favourite software to take with you on a USB stick wherever you go, and evolving in successive revisions as your needs and preferences change.

795

Since we will be changing our personalized image over a number of revisions, and we want to track those changes, trying things experimentally and possibly reverting them if things don't work out, we will keep our configuration in the popular `git` version control system. We will also use the best practice of autoconfiguration via `auto` scripts as described in Managing a configuration.

796

16.4.1 First revision

797

$ mkdir -p tutorial3/auto
$ cp /usr/share/doc/live-build/examples/auto/* tutorial3/auto/
$ cd tutorial3

798

Edit `auto/config` to read as follows:

799

#!/bin/sh
lb config noauto \
--architectures i386 \
--linux-flavours 686-pae \
"${@}"

800

Perform `lb config` to generate the config tree, using the `auto/config` script you just created:

801

$ lb config

802

Now populate your local package list:

803

$ echo "task-lxde-desktop iceweasel xchat" >> config/package-lists/my.list.chroot

804

First, `--architectures i386` ensures that on our `amd64` build system, we build a 32-bit version suitable for use on most machines. Second, we use `--linux-flavours 686-pae` because we don't anticipate using this image on much older systems. Third, we have chosen the lxde task metapackage to give us a minimal desktop. And finally, we have added two initial favourite packages: iceweasel and xchat.

805

Now, build the image:

806

# lb build

807

Note that unlike in the first two tutorials, we no longer have to type `2>&1 | tee build.log` as that is now included in `auto/build`.

808

Once you've tested the image (as in Tutorial 1) and are satisfied it works, it's time to initialize our `git` repository, adding only the auto scripts we just created, and then make the first commit:

809

$ git init
$ cp /usr/share/doc/live-build/examples/gitignore .gitignore
$ git add .
$ git commit -m "Initial import."

810

16.4.2 Second revision

811

In this revision, we're going to clean up from the first build, add the vlc package to our configuration, rebuild, test and commit.

812

The `lb clean` command will clean up all generated files from the previous build except for the cache, which saves having to re-download packages. This ensures that the subsequent `lb build` will re-run all stages to regenerate the files from our new configuration.

813

# lb clean

814

Now append the vlc package to our local package list in `config/package-lists/my.list.chroot`:

815

$ echo vlc >> config/package-lists/my.list.chroot

816

Build again:

817

# lb build

818

Test, and when you're satisfied, commit the next revision:

819

$ git commit -a -m "Adding vlc media player."

820

Of course, more complicated changes to the configuration are possible, perhaps adding files in subdirectories of `config/`. When you commit new revisions, just take care not to hand edit or commit the top-level files in `config` containing `LB_*` variables, as these are build products, too, and are always cleaned up by `lb clean` and re-created with `lb config` via their respective `auto` scripts.

821

We've come to the end of our tutorial series. While many more kinds of customization are possible, even just using the few features explored in these simple examples, an almost infinite variety of different images can be created. The remaining examples in this section cover several other use cases drawn from the collected experiences of users of live systems.

822

16.5 A VNC Kiosk Client

823

Use case: Create an image with live-build to boot directly to a VNC server.

824

Make a build directory and create an skeletal configuration inside it, disabling recommends to make a minimal system. And then create two initial package lists: the first one generated with a script provided by live-build named `Packages` (see Generated package lists), and the second one including xorg, gdm3, metacity and xvnc4viewer.

825

$ mkdir vnc-kiosk-client
$ cd vnc-kiosk-client
$ lb config -a i386 -k 686-pae --apt-recommends false
$ echo '! Packages Priority standard' > config/package-lists/standard.list.chroot
$ echo "xorg gdm3 metacity xvnc4viewer" > config/package-lists/my.list.chroot

826

As explained in Tweaking APT to save space you may need to re-add some recommended packages to make your image work properly.

827

An easy way to list recommends is using apt-cache. For example:

828

$ apt-cache depends live-config live-boot

829

In this example we found out that we had to re-include several packages recommended by live-config and live-boot: `user-setup` to make autologin work and `sudo` as an essential program to shutdown the system. Besides, it could be handy to add `live-tools` to be able to copy the image to RAM and `eject` to eventually eject the live medium. So:

830

$ echo "live-tools user-setup sudo eject" > config/package-lists/recommends.list.chroot

831

After that, create the directory `/etc/skel` in `config/includes.chroot` and put a custom `.xsession` in it for the default user that will launch metacity and start xvncviewer, connecting to port `5901` on a server at `192.168.1.2`:

832

$ mkdir -p config/includes.chroot/etc/skel
$ cat > config/includes.chroot/etc/skel/.xsession << EOF
#!/bin/sh
/usr/bin/metacity &
/usr/bin/xvncviewer 192.168.1.2:1
exit
EOF

833

Build the image:

834

# lb build

835

Enjoy.

836

16.6 A base image for a 128MB USB key

837

Use case: Create a default image with some components removed in order to fit on a 128MB USB key with a little space left over to use as you see fit.

838

When optimizing an image to fit a certain media size, you need to understand the tradeoffs you are making between size and functionality. In this example, we trim only so much as to make room for additional material within a 128MB media size, but without doing anything to destroy the integrity of the packages contained within, such as the purging of locale data via the localepurge package, or other such "intrusive" optimizations. Of particular note, we use `--debootstrap-options` to create a minimal system from scratch.

839

$ lb config --apt-indices false --apt-recommends false --debootstrap-options "--variant=minbase" --firmware-chroot false --memtest none

840

To make the image work properly, we must re-add, at least, two recommended packages which are left out by the `--apt-recommends false` option. See Tweaking APT to save space

841

$ echo "user-setup sudo" > config/package-lists/recommends.list.chroot

842

Now, build the image in the usual way:

843

# lb build 2>&1 | tee build.log

844

On the author's system at the time of writing this, the above configuration produced a 110MB image. This compares favourably with the 192MB image produced by the default configuration in Tutorial 1.

845

Leaving off APT's indices with `--apt-indices false` saves a fair amount of space, the tradeoff being that you need to do an `apt-get update` before using apt in the live system. Dropping recommended packages with `--apt-recommends false` saves some additional space, at the expense of omitting some packages you might otherwise expect to be there. `--debootstrap-options "--variant=minbase"` bootstraps a minimal system from the start. Not automatically including firmware packages with `--firmware-chroot false` saves some space too. And finally, `--memtest none` prevents the installation of a memory tester.

846

Note: A minimal system can also be achieved using hooks, like for example the `stripped.hook.chroot` hook found in `/usr/share/doc/live-build/examples/hooks`. It may shave off additional small amounts of space and produce an image of 91MB. However, it does so by removal of documentation and other files from packages installed on the system. This violates the integrity of those packages and that, as the comment header warns, may have unforeseen consequences. That is why using a minimal debootstrap is the recommended way of achieving this goal.

847

16.7 A localized GNOME desktop and installer

848

Use case: Create a GNOME desktop image, localized for Switzerland and including an installer.

849

We want to make an iso-hybrid image for i386 architecture using our preferred desktop, in this case GNOME, containing all of the same packages that would be installed by the standard Debian installer for GNOME.

850

Our initial problem is the discovery of the names of the appropriate language tasks. Currently, live-build cannot help with this. While we might get lucky and find this by trial-and-error, there is a tool, `grep-dctrl`, which can be used to dig it out of the task descriptions in tasksel-data, so to prepare, make sure you have both of those things:

851

# apt-get install dctrl-tools tasksel-data

852

Now we can search for the appropriate tasks, first with:

853

$ grep-dctrl -FTest-lang de /usr/share/tasksel/descs/debian-tasks.desc -sTask
Task: german

854

By this command, we discover the task is called, plainly enough, german. Now to find the related tasks:

855

$ grep-dctrl -FEnhances german /usr/share/tasksel/descs/debian-tasks.desc -sTask
Task: german-desktop
Task: german-kde-desktop

856

At boot time we will generate the de_CH.UTF-8 locale and select the ch keyboard layout. Now let's put the pieces together. Recalling from Using metapackages that task metapackages are prefixed `task-`, we just specify these language boot parameters, then add standard priority packages and all our discovered task metapackages to our package list as follows:

857

$ mkdir live-gnome-ch
$ cd live-gnome-ch
$ lb config \
-a i386 \
--bootappend-live "boot=live components locales=de_CH.UTF-8 keyboard-layouts=ch" \
--debian-installer live
$ echo '! Packages Priority standard' > config/package-lists/standard.list.chroot
$ echo task-gnome-desktop task-german task-german-desktop >> config/package-lists/desktop.list.chroot
$ echo debian-installer-launcher >> config/package-lists/installer.list.chroot

858

Note that we have included the debian-installer-launcher package to launch the installer from the live desktop. The `586` kernel flavour, which is currently necessary for the launcher to work properly, will be included by default.